3 - 40
INSP
ADJ
REAR SHOCK ABSORBER REBOUND DAMPING FORCE
ADJUSTMENT
EC36N014
REAR SHOCK ABSORBER REBOUND
DAMPING FORCE ADJUSTMENT
1. Adjust:
• Rebound damping force
By turning the adjuster
1
.
Stiffer
a
→
Increase the rebound damp-
ing force. (Turn the adjuster
1
in.)
Softer
b
→
Decrease the rebound damp-
ing force. (Turn the adjuster
1
out.)
Extent of adjustment:
Maximum
Minimum
Fully turned in
position
20 clicks out
(from maximum
position)
• STANDARD POSITION:
This is the position which is back by the spe-
cific number of clicks from the fully turned-in
position. (Which align the punch mark
a
on
the adjuster with the punch mark
b
on the
bracket.)
* For EUROPE, AUS, NZ and ZA
CAUTION:
Do not force the adjuster past the minimum
or maximum extent of adjustment. The
adjuster may be damaged.
Standard position:
About 7 clicks out
* About 10 clicks out
www.PlanDeGraissage.org
