5 - 7
CHAS
FRONT WHEEL AND REAR WHEEL
8. Tighten:
• Bolt (axle holder)
1
NOTE:
Before tightening the bolt, fit the wheel axle to
the axle holder by stroking the front fork sev-
eral times with the front brake applied.
T
R
.
.
23 Nm (2.3 m · kg, 17 ft · lb)
9. Install:
• Brake hose
1
To brake hose holder
2
.
NOTE:
Before tightening the bolt (brake hose holder),
align the top
a
of the brake hose neck with the
brake hose holder bottom
b
. Then pass the
brake hose in front of the axle boss
c
and fit it
into the hose groove
d
so that the brake hose
does not contact the nut (wheel axle).
T
R
.
.
10 Nm (1.0 m · kg, 7.2 ft · lb)
10. Install:
• Brake hose cover
1
• Washer
2
• Bolt [brake hose cover (M8)]
3
• Bolt [brake hose cover (M6)]
4
T
R
.
.
16 Nm (1.6 m · kg, 11 ft · lb)
T
R
.
.
7 Nm (0.7 m · kg, 5.1 ft · lb)
www.PlanDeGraissage.org
