5 - 42
CHAS
EC5B5000
ASSEMBLY AND INSTALLATION
Handlebar
1. Install:
• Handlebar
1
• Handlebar upper holder
2
• Bolt (handlebar upper holder)
3
NOTE:
• The handlebar upper holder should be
installed with the punched mark
a
forward.
• First tighten the bolts on the front side of the
handlebar upper holder, and then tighten the
bolts on the rear side.
2. Install:
• Left grip
1
Apply the adhesive to the handlebar
2
.
NOTE:
• Before applying the adhesive, wipe off
grease or oil on the handlebar surface
a
with a lacquer thinner.
• Install the left grip to the handlebar so that
the line
b
between the two arrow marks
faces straight upward.
T
R
.
.
28 Nm (2.8 m · kg, 20 ft · lb)
3. Install:
• Right grip
1
• Collar
2
Apply the adhesive on the tube guide
3
.
NOTE:
• Before applying the adhesive, wipe off
grease or oil on the tube guide surface
a
with a lacquer thinner.
• Install the grip to the tube guide so that the
grip match mark
b
and tube guide slot
c
form the angle as shown.
R
L
90˚
3
1
b
c
HANDLEBAR
www.PlanDeGraissage.org