5 - 37
CHAS
FRONT FORK
21. Measure:
• Distance
a
Out of specification
→
Turn into the lock-
nut.
Distance
a
:
20 mm (0.79 in) or more
Between damper rod
1
top and
locknut
2
top.
22. Loosen:
• Rebound damping adjuster
1
NOTE:
• Loosen the rebound damping adjuster finger
tight.
• Record the set position of the adjuster (the
amount of turning out the fully turned in posi-
tion).
23. Install:
• Cushion rubber
1
• Washer
2
• Spacer
3
To front fork cap bolt
4
.
NOTE:
Install the cushion rubber with its smaller
dia.end
a
facing the front fork cap bolt.
24. Install:
• Push rod
1
• Fork spring
2
NOTE:
• Install the fork spring with the damper rod
3
pulled up.
• After installing the fork spring, hold the
damper rod end so that it will not go down.
25. Install:
• Front fork cap bolt
1
Fully tighten the front fork cap bolt onto
the damper rod by hand.
www.PlanDeGraissage.org
