21
Connection
(8) Connecting the TO TG terminal to a MIDI device
Connect the TO HOST terminal of a MIDI device to the TO TG terminal of the UW500
using an optional serial cable (8-pin Macintosh Peripheral cable). At this time, set the
HOST SELECT switch of the MIDI device to “PC-1” or “Mac”, regardless of the
computer you are using.
When you are using the TO TG terminal, you can use 5 MIDI OUT ports and 1 MIDI IN
port to control the connected MIDI device.
See page 44 for more information on the relationship between the
UW500’s terminals and the port number.
(9) Connecting the MIDI terminal to a MIDI device
Use optional MIDI cables to connect the MIDI IN terminal of the MIDI device to the
MIDI OUT terminal of the UW500. Also, connect the MIDI OUT terminal of the MIDI
device to the MIDI IN terminal of the UW500. At this time, set the HOST SELECT
switch of the MIDI device to “MIDI.”
See page 44 for more information on the relationship between the
UW500’s terminals and the port number.
NOTE
UW500
serial cable
Set the HOST SELECT
switch of the MIDI device to
“PC-1” or “Mac.”
MIDI device
NOTE
UW500
MIDI cables
MIDI cables
Set the HOST
SELECT switch of the
MIDI device to “MIDI.”
MIDI device
UW500.book Page 21 Monday, October 16, 2000 10:21 AM
