35
Hard Disk Recording
3.
Set the INPUT 1 or 2 gain switch to
“GUITAR”
and set the INPUT SELECT
switch on the rear panel to
“MONO.”
If a stereo effect unit is connected to the INPUT 1 and 2 jacks, set the
INPUT SELECT switch to “STEREO.”
4.
Start XGworks. From the
[File]
menu, select
[Open]
and open the record-
ing file.
5.
From the
[Setup]
menu, select
[System Setup]
. In the Device page, select
an appropriate device drivers.
For detailed Information, refer to step 5 on page 32.
NOTE
NOTE
UW500.book Page 35 Monday, October 16, 2000 10:21 AM
