28
Installing the Driver
•
Specifying the output destination of audio and MIDI signals
This section explains how to set up Windows 98 to use the UW500. For information
on setting up your sequence software, refer to the owner’s manual for the software.
Setup for audio playback and recording
1.
Double-click
“Multimedia”
in the
“Control Panel”
to open the Multime-
dia Properties window.
2.
Click the
“Audio”
tab.
3.
Click the “Preferred device” box in
“Playback”
and select
“USB Audio
Device.”
“USB Audio Device (1)” may appear, depending on the computer. If two or
more USB audio devices are connected, the corresponding number
appears in parentheses.
4.
Click the “Preferred device” box in
“Recording”
and select
“USB Audio
Device.”
5.
Check the
“Use only preferred devices”
checkbox and click
[OK]
.
NOTE
UW500.book Page 28 Monday, October 16, 2000 10:21 AM
