19
Connection
(4) Connecting an electric guitar or microphone
Connect an electric guitar, guitar effect, or microphone to INPUT 1 or 2. Set the gain
switch for INPUT 1 or 2 to “GUITAR” or “MIC” and set the INPUT SELECT switch to
“MONO.”
Use caution when you set the gain switch. An inappropriate setting may
damage your hearing or other audio devices.
Be sure to lower the INPUT 1 or 2 knob setting to minimum before connect-
ing a cable to the INPUT 1 or 2 jack.
Refer to page 34 for more information on the digital audio recording of gui-
tar or other instruments.
(5) Connecting headphones
Connect a standard stereo plug of your headphones to the PHONES jack of the
UW500. Use the OUTPUT knob to adjust the headphone volume.
NOTE
Set the INPUT SELECT switch
on the rear panel to “MONO.”
microphone
guitar
“GUITAR” for guitar connecion
“MIC” for microphone connection
UW500.book Page 19 Monday, October 16, 2000 10:21 AM
