39
Playing the Demo Song
■
Tracking down on the computer
Using XGworks and the UW500, you can track down multiple Wave files or playback
sounds from SoftSynthesizer into a single Wave file. The resultant Wave file can be
converted into an MP3 file by using a third-party MP3 encoder, or recorded on a CD-R.
1.
Set the INPUT SELECT switch on the rear panel to “TRACK DOWN.”
2.
Click a cell in the “Type” column of the recording track to select “WAVE.”
If you click a cell in the “Rec” column to place the corresponding track
into record-ready status, an “R” mark appears in the “Rec” column. If you
click the Record button in the Play Control panel, the button turns red,
indicating that the track is in recording stand-by mode.
3.
Click the Play button in the Play Control panel to start tracking down.
4.
Click the Stop button, when the song ends.
If you double-click the recorded Wave block, the information on the Wave
block is displayed.
Set the INPUT SELECT
to “TRACK DOWN.”
computer
UW500
XGworks
Soft
Synthesizer
Tracking
down
UW500.book Page 39 Monday, October 16, 2000 10:21 AM
