49
Changing the driver setting (MIDI Patch Screen)
•
THRU output of MIDI signals (MIDI IN
→
MIDI OUT)
You can route MIDI signals received at the input port(s) of the UW500 directly to the
output port(s) of the UW500 (this is called THRU output). This routing is useful when
you wish to route MIDI signals from a MIDI keyboard directly to a tone generator. The
left column shows the UW500’s output ports (1-6), and the top column shows the
UW500’s input ports (1-2). To enable this function, check the
“Thru ON/OFF”
check
box in the lower right corner of the screen.
If you check multiple check boxes vertically, a MIDI signal from one input port on the
UW500 is distributed to multiple output ports on the UW500. If you check multiple
check boxes horizontally, MIDI signals from multiple input ports on the UW500 are
merged and transmitted to one output port on the UW500.
See page 44 for more information on the relationship between the
UW500’s I/O ports and the port numbers.
Routing MIDI signals directly from MIDI IN 1(MIDI
IN terminal) to MIDI OUT 3(B port of TO TG termi-
nal)
First check the
“Thru ON/OFF”
check box on the lower
right corner of the screen. Then check the check box as
shown on the right, and click
[OK]
to enable the
setting.
NOTE
UW500.book Page 49 Monday, October 16, 2000 10:21 AM
