12
Parts and Functions
■
Front Panel
A
DIGITAL IN jack
Digital signal is input here from an
MD or CD player using an optical
digital cable (with a square plug). Set
the INPUT SELECT switch on the rear
panel to “DIGITAL.”
B
DIGITAL OUT jack
This jack is used to record a digital
signal from the computer to a digital
recorder, such as an MD recorder.
Use an optical digital cable (with a
square plug) for connection.
Signals input at INPUT 1-3,
AUX IN and DIGITAL IN can-
not be route directly to the
DIGITAL OUT jack.
C
INPUT 1/2 jacks
Audio signal is input here from a
microphone, electric guitar, electric
bass, electronic musical instrument,
or CD player. Use a standard monau-
ral plug cable for connection.
To use INPUT 1-3 jacks, set
the INPUT SELECT switch
on the rear panel to “STE-
REO” or “MONO.”
D
INPUT 1/2 gain switches
These switches enable you to select a
type of signal input at INPUT 1 and 2
jacks.
For stereo line input, set the gain
switch to “LINE” and input the left
signal to the INPUT 1 jack and the
right signal to the INPUT 2 jack. Set
the INPUT SELECT switch on the rear
panel to “STEREO.”
E
INPUT 1/2 volume knobs
These volume knobs enable you to
adjust the volume level of the audio
signal input at INPUT 1 and 2 jacks.
F
PHONES jack
Connect headphones with a stan-
dard jack here. Use the OUTPUT
knob to adjust the headphone vol-
ume.
1
2
6
7
8
3
4
5
NOTE
NOTE
UW500.book Page 12 Monday, October 16, 2000 10:21 AM
