Yamaha TT-R125(W) 2006, Owner'S Service Manual

Page: 392 / 616

4 - 64
ENG
3. Install the starter clutch 1 on the rotor 2 .
NOTE:
●
Install the starter clutch with its plate portion
a
facing the rotor.
●
Insert the plate portion of the starter clutch
so that it is flush with the surface of contact
b
with the rotor.
1
2
b
a
4. Tighten:
●
Bolt (starter clutch)
NOTE:
Caulk
a
the end of the starter clutch holding
bolt near its outer diameter to serve as a stop-
per.
a
T
R
.
.
30 Nm (3.0 m · kg, 22 ft · lb)
5. Install:
●
Starter wheel gear 1
●
Woodruff key 2
●
Rotor 3
NOTE:
●
Clean the tapered portion of the crankshaft
and the magneto hub.
●
When installing the magneto rotor, make
sure the woodruff key is properly seated in
the key way of the crankshaft.
●
Apply the engine oil on the starter wheel
gear inner circumference.
6. Install:
●
Plain washer 1
●
Nut (magneto) 2
NOTE:
Tighten the nut (magneto) while holding the
magneto with a sheave holder
3 .
Sheave holder:
YS-1880-A/90890-01701
2
1
3
E
T
R
.
.
80 Nm (8.0 m · kg, 58 ft · lb)
CDI MAGNETO AND STARTER CLUTCH
(TT-R125E/TT-R125LWE)