En
110
■
Configuration
Configures the output characteristics of the speakers.
• When you configure the speaker size, select “Large” if the woofer diameter of your speaker is
16 cm (6-1/4”) or larger or “Small” if it is smaller than 16 cm (6-1/4”).
❑
Front
Selects the size of the front speakers.
Settings
• “Front” is automatically set to “Large” when both “Subwoofer 1” and “Subwoofer 2” are set to “None”.
❑
Center
Selects whether or not a center speaker is connected and its size.
Settings
❑
Surround
Selects whether or not surround speakers are connected and its size.
Settings
❑
Surround Back
Selects whether or not surround back speakers are connected and its size.
Settings
• “Surround Back” is automatically set to “None” when “Surround” is set to “None”.
❑
Front Presence
Selects whether or not front presence speakers are connected.
Settings
❑
Rear Presence
Selects whether or not to rear presence speakers are connected.
Settings
• “Rear Presence” is automatically set to “None” when “Surround” or “Front Presence” is set to “None”.
Large
Select this for large speakers.
The front speakers will produce all of the front channel frequency
components.
Small (default)
Select this for small speakers.
The subwoofer will produce front channel components lower than the
specified crossover frequency (default: 80Hz).
Large
Select this for large speaker.
The center speaker will produce all of the center channel frequency
components.
Small (default)
Select this for small speaker.
The subwoofer will produce center channel components lower than the
specified crossover frequency (default: 80Hz).
None
Select this when no center speaker is connected.
The front speakers will produce center channel audio.
Large
Select this for large speakers.
The surround speakers will produce all of the surround channel
frequency components.
Small (default)
Select this for small speakers.
The subwoofer will produce surround channel components lower than
the specified crossover frequency (default: 80Hz).
None
Select this when no surround speakers are connected.
The front speakers will produce surround channel audio. Virtual
CINEMA DSP works when you select a sound program.
Large x1
Select this when 1 large speaker is connected.
The surround back speaker will produce all of the surround back channel
frequency components.
Large x2
Select this when 2 large speakers are connected.
The surround back speakers will produce all of the surround back channel
frequency components.
Small x1
Select this when 1 small speaker is connected.
The subwoofer will produce surround back channel components lower than
the specified crossover frequency (default: 80Hz).
Small x2
(default)
Select this when 2 small speakers are connected.
The subwoofer will produce surround back channel components lower than
the specified crossover frequency (default: 80Hz).
None
Select this when no surround back speakers are connected.
The surround speakers and subwoofer (or front speakers) will produce
surround back channel audio.
Use (default)
Select this when front presence speakers are connected.
None
Select this when no front presence speakers are connected.
Use
Select this when rear presence speakers are connected.
None (default)
Select this when no rear presence speakers are connected.
