Yamaha RX-A2010 Owner'S Manual Download Page 5

Page: 5 / 170

Accessories

Check that the following accessories are supplied with this product.

■

Remote control

■

Batteries (AAA, R03, UM-4) (x 4)

Insert into the remote control in the correct polarity (+/-)

■

Simplified

remote control

■

Power cable

* The figure of the supplied power

cable differs depending on regions.

■

YPAO microphone

■

AM antenna

■

FM antenna

* The figure of the supplied FM antenna differs depending

on regions.

■

Easy Setup Guide

■

Safety Brochure

■

CD-ROM (Owner’s Manual)

Operating range of the remote control

• Aim the remote control directly at the remote control sensor on this unit during operation.

• Some features are not available in certain regions.

• Design and specifications are subject to change in part as a result of improvements, etc. In case of

differences between the manual and product, the product has priority.

• This manual mainly explains operations using the supplied remote control.

• This manual describes both the “iPod” and “iPhone” as the “iPod”. “iPod” means both “iPod” and

“iPhone” unless the explanation describes exceptions.

• “

” indicates the cautions concerning operations or setup of the unit.

• “

” indicates the explanations for better use.

30°

Within 6 m (20 ft)

Summary of Contents for RX-A2010











































































































































































Search results

Summary of Contents for RX-A2010

Reviews:

Related manuals for RX-A2010

Brands by name

Popular brands

Yamaha RX-A2010, Owner'S Manual

Search results

Summary of Contents for RX-A2010

Reviews:

Related manuals for RX-A2010

Brands by name

Popular brands