En
111
❑
Subwoofer 1, Subwoofer 2
Selects whether or not subwoofer is connected to the SUBWOOFER 1 or
SUBWOOFER 2 jack and its phase.
Settings
• When the bass sound is lacking or unclear, switch the subwoofer phase.
❑
SWFR Layout
Selects a subwoofer layout when 2 subwoofers are used.
Settings
• This setting is not available when “Subwoofer 1” or “Subwoofer 2” is set to “None”.
❑
Extra Bass
Sets the speakers to produce the front channel low-frequency components.
Settings
• This setting is not available when both “Subwoofer 1” and “Subwoofer 2” are set to “None”, or “Front” is set
to “Small”.
■
Distance
Sets the distance between each speaker and listening position so that sounds from the
speakers reach the listening position at the same time. First, select the unit of distance
from “Meter” or “Feet”.
Choices
Front L, Front R, Center, Surround L, Surround R, Surround Back L, Surround Back R, Front
Presence L, Front Presence R, Rear Presence L, Rear Presence R, Subwoofer 1, Subwoofer 2
Setting range
0.30m ~ 24.00m (1.0ft ~ 80.0ft) *0.05m (0.2ft) steps
Default
3.00m (10.0ft)
■
Level
Adjusts the volume of each speaker.
Choices
Front L, Front R, Center, Surround L, Surround R, Surround Back L, Surround Back R, Front
Presence L, Front Presence R, Rear Presence L, Rear Presence R, Subwoofer 1, Subwoofer 2
Setting range
-10.0dB ~ +10.0dB (0.5dB steps)
Default
0.0dB
Adjusting while viewing the front display
a
Press LEVEL.
b
Use the cursor keys ( / ) to select a speaker.
c
Use the cursor keys ( / ) to adjust the volume of the selected speaker.
Use
Normal
(default)
Select this when a subwoofer is connected to the SUBWOOFER 1 or
SUBWOOFER 2 jack (not to reverse the phase). The subwoofer will
produce LFE (low-frequency effect) channel audio and low-frequency
components from other channels.
Reverse
Select this when a subwoofer is connected to the SUBWOOFER 1 or
SUBWOOFER 2 jack (reverse the phase). The subwoofer will produce
LFE (low-frequency effect) channel audio and low-frequency
components from other channels.
None
Select this when no subwoofer is connected to the SUBWOOFER 1 or
SUBWOOFER 2 jack. The front speakers will produce LFE (low-
frequency effect) channel audio and low-frequency components from
other channels when both “Subwoofer 1” and “Subwoofer 2” are set
to “None”.
Left + Right
Select this when 2 subwoofers are placed on the left and right sides of
the room.
Front + Rear
Select this when 2 subwoofers are placed on the front and rear sides of
the room.
Monaural x2
(default)
Select this when 2 subwoofers are placed freely.
Off (default)
Depending on the size of the front speakers, either the subwoofer or
front speakers produce the front channel low-frequency components.
On
Both the front speakers and subwoofer produce the front channel low-
frequency components.
