En
20
❑
Connecting speaker cables
Speaker cables have two wires. One is for connecting the negative (-) terminal of the unit
and the speaker, and the other is for the positive (+) terminal. If the wires are colored to
prevent confusion, connect the black wire to the negative and the other wire to the positive.
a
Remove approximately 10 mm (3/8”) of insulation from the ends of the speaker cable, and
twist the bare wires of the cable together firmly.
b
Loosen the speaker terminal.
c
Insert the bare wires of the cable into the gap on the side (upper right or bottom left) of the
terminal.
d
Tighten the terminal.
Using a banana plug
a
Tighten the speaker terminal.
b
Insert a banana plug into the end of the terminal.
❑
Connecting the subwoofer
Use an audio pin cable to connect the subwoofer.
FR
ONT
-
+
a
a
c
c
b
b
d
d
+ (red)
– (black)
FR
ONT
+
a
a
b
b
Banana plug
(
S
INGLE
)
PRE OUT
CENTER
CENTER
S
UR. BAC
K
S
URRUN
D
1
2
FRO
NT
(REA
R)
S
UBW
OOFER
(FR
ONT)
Audio pin cable
1
Speaker connections
2 3 4 5 6 7 8
