En
99
■
Rename/Icon Select
Changes the input source name and icon displayed on the front display or TV screen.
Input sources
AV1~7, V-AUX, AUDIO1~4, PHONO, USB, DOCK, MULTI CH
■
Setup procedure
1
Use the cursor keys ( / ) to select an icon and press the cursor key ( ).
2
Press ENTER, use the cursor keys to rename, and then press ENTER again.
3
Use the cursor keys to select “OK” and press ENTER.
• To clear the entry, select “CLEAR”.
4
To exit from the menu, press ON SCREEN.
■
Decoder Mode
Sets the format of digital audio playback to DTS.
For example, if this unit does not detect DTS audio and outputs noise, set “Decoder
Mode” to “DTS”.
Input sources
AV1~7, V-AUX, AUDIO1~4 (available only when any audio digital input jack is assigned)
Settings
■
Standby Charge
Selects whether to charge the iPod connected to the iPod dock or iPod wireless system
when this unit is in standby mode.
Input sources
DOCK (iPod)
Settings
■
iPod Interlock
Selects whether to control this unit in conjunction with operations of the iPod connected
to the iPod wireless system.
Input sources
DOCK (iPod)
• This function is available only when an iPod wireless system is connected to this unit.
❑
Power & Input
Selects whether to control the power and input source selection of this unit in
conjunction with iPod operations.
Settings
• When “Power & Input” is set to “On”, the iPod connected to the iPod wireless system is charged regardless
of the “Standby Charge” setting (p.99).
❑
Volume
Selects whether to control the volume of this unit in conjunction with iPod operations.
Settings
Auto (default)
Automatically selects an audio format to match the input audio signal.
DTS
Selects DTS only. (Other audio signals are not reproduced.)
On (default)
Charges the iPod even when this unit is in standby mode.
Off
Does not charge the iPod when this unit is in standby mode.
On (default)
Enables power and input interlocking controls. When you start
playback of the iPod, this unit turns on and “DOCK” is selected as the
input source. When you stop playback, this unit enters standby mode
after a short time.
Off
Disables power and input interlocking controls.
On (default)
Enables volume interlocking controls. When you adjust the iPod
volume, the volume of the unit is also adjusted.
Off
Disables volume interlocking control.
