Yamaha RX-A2010 Owner'S Manual Download Page 112

Page: 112 / 170

112

■

Parametric EQ

Adjusts sound quality of tone with an equalizer.

❑

PEQ Select

Selects a type of equalizer to be used.

Settings

• “YPAO:Flat”, “YPAO:Front” and “YPAO:Natural” are available only when the measurement results of “Auto

Setup” have already been saved (p.44).

❑

PEQ Data Copy

Copies the parametric equalizer values acquired with “Auto Setup” (p.44) to the
“Manual” fields for fine adjustment.

Choices

■

Manual equalizer adjustment

Set “PEQ Select” to “Manual” and press ENTER.

Use the cursor keys to select a speaker and press ENTER.

Use the cursor keys to select an item and press ENTER.

Band / Gain:

You can select a center frequency from the preset 7 bands and adjust the gain.

Freq. / Gain:

You can adjust the center frequency of the selected band and adjust the gain.

Q / Gain:

You can adjust the Q factor (bandwidth) of the selected band and adjust the gain.

Clear:

Restores the default settings for the selected speaker.

Use the cursor keys to adjust parameters and press ENTER.

Setting range

Gain: -20.0dB ~ +6.0dB (0.5dB steps)

Center frequency: 31.3Hz ~ 16.0kHz

Q factor: 0.500 ~ 10.08

To exit from the menu, press ON SCREEN.

■

Test Tone

Enables/disabled the test tone output. Test tone output helps you to adjust the speaker
balance or equalizer while confirming its effect.

Settings

Manual

Select this when you want to adjust the equalizer manually.
For details, see “Manual equalizer adjustment”.

YPAO:Flat

Adjusts individual speakers to achieve the same characteristics.

YPAO:Front

Adjusts individual speakers to achieve the characteristics same as the
front speakers.

YPAO:Natural

Adjusts all speakers to achieve a natural sound.

Through

Does not use the equalizer.

Flat > Manual

Copies the “Flat” values acquired with “Auto Setup”.

Front > Manual

Copies the “Front” values acquired with “Auto Setup”.

Natural > Manual

Copies the “Natural” values acquired with “Auto Setup”.

Off (default)

Does not output test tones.

Outputs test tones automatically when you adjust the speaker balance,
equalizer, etc.

Summary of Contents for RX-A2010











































































































































































Search results

Summary of Contents for RX-A2010

Reviews:

Related manuals for RX-A2010

Brands by name

Popular brands

Yamaha RX-A2010, Owner'S Manual

Search results

Summary of Contents for RX-A2010

Reviews:

Related manuals for RX-A2010

Brands by name

Popular brands