Yamaha FJR13AY 2009, Service Manual

Page: 670 / 744

YCC-S (Yamaha Chip Controlled-Shift) SYSTEM (FJR13AE only)
8-187
Sh_ _62 Malfunction history
code erasure
• No history Sh_ _62 —
• History exists 01–09
• First displays Sh_
_62 for 6 seconds,
and then displays
the total number
of malfunctions,
including the cur-
rent malfunction,
that have oc-
curred since the
history was last
erased.
• If there are nine or
more of fault
codes stored in
the malfunction
history, “09” is dis-
played.
• If fault codes are stored in the malfunc-
tion history, the hand shift select indicator
light will come on.
To erase the history, set the engine stop
switch from “
” to “ ”.
After the history is erased, the hand shift
select indicator light will go off.
Sh_ _63 Clutch actuation op-
eration
TIP
The checking meth-
od for the diagnostic
code (Sh_ _63) can-
not be performed
when any of the fol-
lowing fault codes
are detected.
Sh_ _11, Sh_ _12,
Sh_ _13, Sh_ _15,
Sh_ 16, Sh_ _17,
Sh_ _25, Sh_ _26,
Sh_ _36, Sh_ _37,
and Sh_ _44
Sh_ _63 The clutch actuator can be operated in this
mode.
1. The hand shift select indicator light
comes on when the clutch is engaged.
2. Set the engine stop switch to “ ” and
push the hand shift select button simul-
taneously. The clutch will disengage
and the hand shift select indicator light
will go off.
3. Set the engine stop switch to “ ” and
push the hand shift select button simul-
taneously. The clutch will engage and
the hand shift select indicator light will
come on.
4. If the clutch actuator sensor is malfunc-
tioning, the hand shift select indicator
light will flash.
Diagnos-
tic code
No.
Item
Data displayed on
meter (reference
value)
Checking method