Yamaha F30B 2018, Service Manual

Page: 248 / 348

8-28
S himming
e. While holding the drive shaft to prevent it
from turning, tighten the center bolt “1” to
the specified torque.
f. Place the lower unit in an upright position.
g. Install the special service tool “1” onto the
drive shaft at the lowest possible position,
the point where the shaft diameter is 16.0
mm (0.63 in).
h. Wrap 5 layers of tape “2” around the drive
shaft.
i. Install the handle stopper “3” in the upper
end “a” position of the tape “2” on the drive
shaft, and then tighten the nuts “4” to the
specified torque.
*1. Order from Yamaha Parts Distribution
Center.
j. Set up the special service tools “1”, “2”,
and “3”, and then place another special
service tool “4” on the handle stopper “5” to
apply a load.
A. Worldwide
B. USA and Canada
Center bolt “1” (shimming)
5 N·m (0.5 kgf·m, 3.7 lb·ft)
1
A
1
B
T
R
.
.
Backlash indicator “1”
90890-06706
Backlash indicator rod “1”
YB-06265
Handle holder “3”
EU0-23814-30 (2 required) *1
Handle stopper nut “4” (shimming)
2.0 N·m (0.20 kgf·m, 1.5 lb·ft)
1
3
a
2
4
T
R
.
.
5
1
2
4
3