Yamaha F30B 2018, Service Manual

Page: 143 / 348

6-16
Throttle link rod
b. Check that the protrusion “a” on the throttle
lever “1” and the protrusion “b” on the shift
bracket “2” are aligned.
c. Turn the throttle cam until it contacts the
roller “3” slightly.
d. Adjust the throttle link rod length so that its
end “a” fits onto the protrusion “b” on the
throttle cam, and then install the throttle
link rod to the throttle cam.
e. Check that the link rod locknut “1” is fully
seated on the throttle link rod joint “2”.
f. Tighten the link rod locknut “1” from its fully
seated position to the specified angle.
▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲
Link rod locknut “1”
90

b
a
b
a
3
1
2
b
1 2
a
T
R
.
.