Yamaha 6c, Owner'S Manual

Page: 117 / 186

4-11
GB
Spark plug Cleaning/Adjustment
● ● ●
4-12
Greasing points Greasing
●
4-18
Gear oil Change
● ●
4-22
Fuel system Inspection
●
4-14
Fuel filter Cleaning
● ● ●
4-15
Fuel tank *2 Cleaning
●
4-23
Idling speed Adjustment
●
4-16
Anode Inspection/Replacement
1 1
4-24
Outboard motor exterior Inspection
● ●
4-28
Cooling water passages Cleaning
● ●
4-7
Propeller and cotter pin Inspection/Replacement
● ●
4-19
Battery *1 Inspection
●
(every
4-25
month)
Carburetor setting Inspection/Adjustment
1 1
—
Ignition timing Inspection/Adjustment
1 1
—
Bolts and nuts Retightening
1 1
4-28
Interval
Item
Initial Every
Refer
page
10 hours
50 hours
(3 months)
100 hours
(6 months)
200 hours
(1 year)
EMK30011*
MAINTENANCE CHART
Frequency of maintenance operations may be adjusted according to the operating con-
ditions, but the following table gives general guidelines.
The mark (
●
) indicates the check-ups which you may carry out yourself.
The mark (
1
) indicates work to be carried out by your Yamaha dealer.
*1..........for Electric starter model
*2..........If a portable fuel tank is equipped
NOTE:
Cooling water passages;
When operating in salt water, turbid or muddy water, the engine should be flushed
with clean water after each use.