60H5E11
3
Specified length
B
: 25.0 mm(0.98 in)
Magnet control link length
E
:
65mm(2.56in) (reference)
Control system
3-10
Standard ignition timing : ATDC 7°
10. Secure the timing plate
5
at the adjusted
position and mark the position with paint.
11. Adjust the fully advanced stop screw
2
so
that the stopper
B
has the specified length.
60H30250
12. Move the magnet control lever
1
until it
touches the fully advanced stop screw
2
.
60H30160
13. Adjust the length of magnet control link so
that the timing mark
C
on the flywheel
aligns with the mark
D
on the base assem-
bly.
60H30260
14. Turn the flywheel clockwise to align the
pointer mark
A
on the timing plate with
standard ignition angle on the flywheel
scale.
60H30180
15. Move the magnet control lever
1
until the
standard ignition timing adjusting screw
3
touches the fully closed stopper
4
on the
cylinder block.
60H30190
