Yamaha 2005 YZF-R1T Owner'S Manual Download Page 97

Page: 97 / 106

SPECIFICATIONS

8-1

Dimensions:

Overall length:

2065 mm (81.3 in)

Overall width:

720 mm (28.3 in)

Overall height:

1105 mm (43.5 in)

Seat height:

835 mm (32.9 in)

Wheelbase:

1395 mm (54.9 in)

Ground clearance:

135 mm (5.31 in)

Minimum turning radius:

3400 mm (133.9 in)

Weight:

With oil and fuel:

193.0 kg (425 lb)

Engine:

Engine type:

Liquid cooled 4-stroke, DOHC

Cylinder arrangement:

Forward-inclined parallel 4-cylinder

Displacement:

998.0 cm³ (60.90 cu.in)

Bore

stroke:

77.0

53.6 mm (3.03

2.11 in)

Compression ratio:

12.40 :1

Starting system:

Electric starter

Lubrication system:

Wet sump

Engine oil:

Type:

SAE10W30 or SAE10W40 or SAE15W40
or SAE20W40 or SAE20W50

Recommended engine oil grade:

API service SE, SF, SG type or higher

Engine oil quantity:

Without oil filter cartridge replacement:

2.90 L (3.07 US qt) (2.55 Imp.qt)

With oil filter cartridge replacement:

3.10 L (3.28 US qt) (2.73 Imp.qt)

Cooling system:

Coolant reservoir capacity (up to the
maximum level mark):

0.25 L (0.26 US qt) (0.22 Imp.qt)

Radiator capacity (including all routes):

2.76 L (2.92 US qt) (2.43 Imp.qt)

Air filter:

Air filter element:

Oil-coated paper element

Fuel:

Recommended fuel:

Premium unleaded gasoline only

Fuel tank capacity:

18.0 L (4.76 US gal) (3.96 Imp.gal)

Fuel reserve amount:

3.4 L (0.90 US gal) (0.75 Imp.gal)

Electronic fuel injection:

Manufacturer:

DENSO

Model:

297500-0300/4

Spark plug(s):

Manufacturer/model:

NGK/CR9EK

Spark plug gap:

0.6–0.7 mm (0.024–0.028 in)

Clutch:

Clutch type:

Wet, multiple-disc

Transmission:

Primary reduction system:

Spur gear

Primary reduction ratio:

65/43 (1.512)

Secondary reduction system:

Chain drive

Secondary reduction ratio:

45/17 (2.647)

Transmission type:

Constant mesh 6-speed

Operation:

Left foot operation

-20 -10 0 10 20 30 40 50 ˚C

SAE 10W-30

SAE 15W-40

SAE 20W-40

SAE 20W-50

SAE 10W-40

U5VY21E0.book Page 1 Friday, September 10, 2004 9:21 AM

Summary of Contents for 2005 YZF-R1T











































































































Search results

Summary of Contents for 2005 YZF-R1T

Reviews:

Related manuals for 2005 YZF-R1T

Brands by name

Popular brands

Yamaha 2005 YZF-R1T, Owner'S Manual

Search results

Summary of Contents for 2005 YZF-R1T

Reviews:

Related manuals for 2005 YZF-R1T

Brands by name

Popular brands