PERIODIC MAINTENANCE AND MINOR REPAIR
6-3
6
10
*
Tires
• Check tread depth and for damage.
• Replace if necessary.
• Check air pressure.
• Correct if necessary.
√
√
√
√
√
11
*
Wheel bearings
• Check bearing for looseness or damage.
√
√
√
√
12
*
Swingarm
• Check operation and for excessive play.
√
√
√
√
• Lubricate with lithium-soap-based grease.
Every 50000 km
13
Drive chain
• Check chain slack, alignment and condition.
• Adjust and lubricate chain with a special O-ring chain lu-
bricant thoroughly.
Every 800 km and after washing the motorcycle or
riding in the rain
14
*
Steering bearings
• Check bearing play and steering for roughness.
√
√
√
√
√
• Lubricate with lithium-soap-based grease.
Every 20000 km
15
*
Steering damper
• Check operation and for oil leakage.
√
√
√
√
16
*
Chassis fasteners
• Make sure that all nuts, bolts and screws are properly
tightened.
√
√
√
√
√
17
Sidestand
• Check operation.
• Lubricate.
√
√
√
√
√
18
*
Sidestand switch
• Check operation.
√
√
√
√
√
√
19
*
Front fork
• Check operation and for oil leakage.
√
√
√
√
20
*
Shock absorber assem-
bly
• Check operation and shock absorber for oil leakage.
√
√
√
√
21
*
Rear suspension relay
arm and connecting
arm pivoting points
• Check operation.
√
√
√
√
22
*
Electronic fuel injection
• Adjust engine idling speed and synchronization.
√
√
√
√
√
√
NO.
ITEM
CHECK OR MAINTENANCE JOB
ODOMETER READING (
×
1000 km)
ANNUAL
CHECK
1
10
20
30
40
U5VY21E0.book Page 3 Friday, September 10, 2004 9:21 AM
