Yamaha 02R Manual Download

Page: 124 / 398

User Interface

02R User’s Guide

Display Functions

The following table lists all the 02R display functions and briefly explains
what they do.

Display Function

Description

SCENE

Store and recall mix scenes.

DIGITAL I/O

Sets digital I/O parameters and selects word
clock.

SETUP

Sets the solo parameters and system prefer-
ences.

UTILITY

Controls the oscillator parameters and access-
es the emphasis monitor, the channel status
monitor, and the battery level check.

MIDI

Set the MIDI channels, build the program
change table, and control MIDI bulk data trans-
fers.

AUTOMIX

Create, store, recall, and play automix programs.

GROUP

Set up the fader and mute groups.

PAIR

Set up channel pairs.

∅

/ATT

Set phase and attenuation.

DELAY

Set the channel delay.

PAN

Set the pan position.

ROUTING

Set the channel routing.

METER

Meter the levels from the individual input chan-
nels, the tape and effect return channels, the 8
main busses, and the 8 auxiliary busses.

VIEW

Set all parameters for the selected channel
and access the channel library.

Set the equalization and access the EQ library.

DYNAMICS

Set the dynamics processor and access the
dynamics library.

AUX 1 to 6

Set the channel levels to the auxiliary busses.

AUX 7 and 8

Set the channel levels to the auxiliary busses
and set the internal effect parameters.

Summary of Contents for 02R















































































































































































































































































































































































































Search results

Summary of Contents for 02R

Reviews:

Related manuals for 02R

Brands by name

Popular brands

Yamaha 02R, Manual

Search results

Summary of Contents for 02R

Reviews:

Related manuals for 02R

Brands by name

Popular brands