manualshive.com logo in svg

Yamaha 02R, Manual

The Yamaha 02R is a versatile digital mixing console designed for professional audio applications. Unlock its full potential with the comprehensive Application Manual, available for free download from manualshive.com. This manual provides detailed instructions and insights on operating and optimizing your Yamaha 02R for seamless audio production.

Share
Download
background image

Mixing and Automix

89

02R Getting Started Guide

Recalling an Automix

1.

Use the [AUTOMIX] button to locate the AUTOMIX 2/7 page.

2.

Use the CURSOR buttons to select the RECALL icon. Use the 
encoder wheel to select an automix.

The 02R will scroll through the available automixes. The program that is 
highlighted will be recalled when you press the [ENTER] button.

3.

Press the [ENTER] button.

The 02R will display a popup confirmation request message asking if you 
want to recall selected automix program. The popup has two icons: 
“CANCEL” and “EXECUTE”.

CANCEL is the default. To cancel the RECALL operation, either press the 
[ENTER] button or wait about 10 seconds—the RECALL operation will be 
automatically cancelled.

To recall the automix, use the CURSOR buttons to select the “EXECUTE” 
icon and press the [ENTER] button. The automix program is recalled.

YOU SHOULD ALWAYS BE CAREFUL WHEN THE 02R DISPLAYS ITS 
CONFIRMATION POPUP MESSAGE!

Note:

When you recall an automix program, you are overwriting the current 

automix. Make sure that you have backed up or stored the current automix just in 
case.

AUTOMIX

Summary of Contents for 02R















































































































































































































































































































































































































Reviews:

No comments

Related manuals for 02R

Preethi Blue Leaf Platinum Instruction Manual & Warranty Card preview
Blue Leaf Platinum
Brand: Preethi Pages: 16
T.MIX DPM-1122 Owner'S Manual preview
DPM-1122
Brand: T.MIX Pages: 20
Scarlett SC-045 Instruction Manual preview
SC-045
Brand: Scarlett Pages: 13
Life Multi Mixer User Manual preview
Multi Mixer
Brand: Life Pages: 4
Clatronic Profi Cook UM 290 Instruction Manual & Guarantee preview
Profi Cook UM 290
Brand: Clatronic Pages: 54
F.F. Group MX 950 PLUS Original Instructions Manual preview
MX 950 PLUS
Brand: F.F. Group Pages: 40
Focus MX-4 User Manual preview
MX-4
Brand: Focus Pages: 168
EarthQuaker Devices Black Ash Operation Manual preview
Black Ash
Brand: EarthQuaker Devices Pages: 2
CAKEWALK Sonar V-STUDIO 100 Getting Started Manual preview
Sonar V-STUDIO 100
Brand: CAKEWALK Pages: 60
LOUD Technologies 1202VLZ4 Quick Start Manual preview
1202VLZ4
Brand: LOUD Technologies Pages: 16
T-Rex 8 BALL DUAL-OCTAVE Manual preview
8 BALL DUAL-OCTAVE
Brand: T-Rex Pages: 4
T-Rex ALBERTA User Manual preview
ALBERTA
Brand: T-Rex Pages: 4
Graco Hydra-Cat 207-388 F Instructions And Parts List preview
Hydra-Cat 207-388 F
Brand: Graco Pages: 12
Brentwood HM-48B Operating And Safety Instructions Manual preview
HM-48B
Brand: Brentwood Pages: 16
AUSTRALIAN MONITOR AMIS PM4 Introduction preview
AMIS PM4
Brand: AUSTRALIAN MONITOR Pages: 2
Radia 5925 DynoMix Owner'S Manual preview
5925 DynoMix
Brand: Radia Pages: 30
Duncan Andromeda User Manual preview
Andromeda
Brand: Duncan Pages: 14
Darkglass Electronics Microtubes B1K User Manual preview
Microtubes B1K
Brand: Darkglass Electronics Pages: 4

Brands by name

Popular brands

Load more brands