Table 4. Operator Controls (See Figure 8) (Continued)
Item
No.
Item
Function
12
Direc-
tion
Con-
trol
Lever
NOTE:
There is a sensor in the seat that actuates an audible buzzer. If the opera-
tor leaves the seat with the key switch
ON
and the lever is not in
NEUTRAL
, the
buzzer will pulse
ON
and
OFF
for 10 seconds.
The Direction Control Lever for the transmission is on the left side of the Display
Switch Cluster. The Direction Control Lever is used on lift trucks without a pedal.
The Direction Control Lever has three positions that are indicated by three green
lights on left side of Display Switch Cluster (see
FOR-
WARD
,
NEUTRAL (N)
, and
REVERSE
. Move the lever to one of the direction
positions for travel. The Direction Control Lever must be in the
NEUTRAL (N)
position before the engine can be started. The reverse lights will be on and, if
equipped, reverse alarm will be activated when the lever is placed in the
REVERSE
position.
Model Description
52
Summary of Contents for VERACITOR GCC030VX
Page 24: ...Figure 6 Display Switch Cluster Right Side Display Inputs Model Description 22...
Page 40: ...Figure 8 Operator Controls Sheet 2 of 2 Model Description 38...
Page 83: ...Figure 13 Seat Adjustment Full Suspension Operating Procedures 81...
Page 172: ...Figure 43 LPG Tank and Bracket Maintenance 170...