1.
Lubricate the wheel rim
and the inner surface of the
tire with tire lubricant or
soap.
2.
Put the wheel rim on the
bed of the press. Put the tire
over the wheel rim. Put the
cage in position on the tire.
Use the press to install the
tire on the wheel rim.
3.
Remove the cage and put
the flange seat (if used), the
side ring, and the lock ring in
position on the wheel rim.
Install the cage on the tire.
Use the press to push the
tire onto the wheel rim so
that the side flange and lock
ring can be installed.
4.
While the cage is holding
the tire on the wheel rim,
install the lock ring. Use a
tire tool to make sure the
lock ring is in the correct
position.
Maintenance
193
Summary of Contents for VERACITOR GCC030VX
Page 24: ...Figure 6 Display Switch Cluster Right Side Display Inputs Model Description 22...
Page 40: ...Figure 8 Operator Controls Sheet 2 of 2 Model Description 38...
Page 83: ...Figure 13 Seat Adjustment Full Suspension Operating Procedures 81...
Page 172: ...Figure 43 LPG Tank and Bracket Maintenance 170...
