Yale VERACITOR GCC030VX, Operating Manual

Page: 158 / 206

WARNING
Do not try to move a fork without a lifting device. Each
hook fork for these lift trucks can weigh 45 to 115 kg
(99 to 253 lb).
NOTE: Forks are to be replaced only in sets and not indi-
vidually.
2. A fork can be removed from the carriage for replacement
of the fork or other maintenance. Slide a hook fork to the
fork removal notch on the carriage. See
Figure 37 and Fig-
ure 39 . Lower the fork onto blocks so that the bottom hook
of the fork moves through the fork removal notch. See Fig-
ure 39 . Lower the carriage further so that the top hook of
the fork is disengaged from the top carriage bar. Move the
carriage away from the fork, or use a lifting device to move
the fork away from the carriage. See
Figure 38 .
1. CARRIAGE BARS
2. HOOK FORK
3. BLOCKS
Figure 37. Remove a Hook Fork
Maintenance
156