Table 3. Instruments – Warning and Indicator Lights (See Figure 7)
Item No.
Item
Function
1
Indicator Light Left
Turn Signal
This green indicator will blink on and off when the left turn signal is selected. Not
on at Start Check.
2
Warning Light,
Engine
Malfunction
Indictor
This amber indicator is on when the system is in the
ON
state, and turns off as the
RUN
state is entered. This indicator will also illuminate when an engine related
fault has occurred. Not on at Start Check.
3
Warning Light,
System
Malfunction
Indicator
This amber light will illuminate when a fault that is not engine related occurs.
4
Indicator Light Air
Filter Restriction
If the lift truck is equipped with the premium monitoring package, this amber Air
Filter Restriction light will illuminate when the air filter restriction switch senses a
restriction in the air filter.
5
Indicator Lights
Direction and
Transmission
Lights
The green direction lights will illuminate when the operator selects the direction of
travel. When the transmission is put into
NEUTRAL
, the green
N
illuminates and
stays lit until transmission is not in
NEUTRAL
.
Model Description
29
Summary of Contents for VERACITOR GCC030VX
Page 24: ...Figure 6 Display Switch Cluster Right Side Display Inputs Model Description 22...
Page 40: ...Figure 8 Operator Controls Sheet 2 of 2 Model Description 38...
Page 83: ...Figure 13 Seat Adjustment Full Suspension Operating Procedures 81...
Page 172: ...Figure 43 LPG Tank and Bracket Maintenance 170...
