Yaesu VR-160, Operating Manual, Page: 92 / 100

VR-160 O
PERATING
M
ANUAL
90
A
PPENDIX
C
OMPUTER
C
ONNECTIONS
The
VR-160
allows connecting a computer USB port to the
ACC
Jack, and enables memory
management and configuration using the Optional ADMS-5 Advanced Data Management
System.
1. Press and hold in the [
BANK
] key for one second to enter the Set mode.
2. Rotate the DIAL knob to select Set Mode Item 01:
ACC SE-
LECT .
Note : Do not forget to pull the DIAL knob to rotate the DIAL
knob.
3. Press the [ BANK
] key briefly to enable adjustment of this Set
Mode Item.
4. Rotate the DIAL knob to select “
PC PROGRAM
”.
5. When you have made your selection, press and hold in the
[
BANK
] key for one second to save the setting and exit to normal operation.
When the ACC Jack configuration is set to “
PC PROGRAM
”, the
“ ” icon will appear at the upper right corner of the display.
Refer to the illustration below, connect the supplied Connection Cable
of the
ADMS-5 between the USB jack of your Computer and the
ACC Jack on the VR-160 .
To Your Computer
(
USB Port
)