
VR-160 O
PERATING
M
ANUAL
74
S
ET
(
M
ENU
)
M
ODE
AM/FM B
ROADCAST
S
ETTING
Enables/Disables the AF DUAL function and sets the time before
Broadcast audio is resumed after the desired frequency signal drops.
Select the antenna to be used for the AM Broadcast band.
Select the antenna to be used for the FM Broadcast band.
Enables/Disables the FM Broadcast audio output to the internal
speaker when using the earphone antenna.
Enables/Disables the stereo output, while receiving the FM Broad-
cast band.
B
ATTERY
S
AVING
S
ETTING
Setting of the Automatic Power-Off feature.
Enables/Disables the
BUSY
LED while the Squelch is open.
Selects the Receive-mode Battery Saver interval (“sleep” ratio).
Setting of the Wakeup feature.
B
EEP
S
ETTING
Enables/Disables the Band-edge beeper while selecting the fre-
quency using the
DIAL
knob.
Adjust the Beep volume level.
Create the beep melody for Bell ringer function.
Enables/Disables the Keypad beeper.
Selects the number of Bell ringer repetitions.
Enables/Disables the Bell ringer function and its sound selection.
CW L
EARNING
/T
RAINING
S
ETTING
Enables/Disables the CW Learning feature.
Selects the CW tone pitch for the CW Learning and CW Training
features.
Enables/Disables the CW Training feature.
T
ONE
S
QUELCH
/DCS S
ETTING
Setting of the DCS code.
Enables/Disables the "Inverted" DCS Tone.
Program the CTCSS Tone frequency for the User programmed Re-
verse CTCSS Decoder.
Sets the Squelch threshold level.
Adjusts the Squelch threshold to the S-meter level.
Selects the Sub Audible Squelch Type.
Setting of the CTCSS Tone Frequency.
Enables/Disables the receiver audio output while the Tone Search
Scanner is activated.
Selects the Tone Search Scanner speed.
S
WITCHES
/K
NOB
S
ETTING
Set the duration that a secondary function of the [
F/W
] key (press
and holding the [
F/W
] key) is held determines the function they ac-
tivate.
Select the [
VOL
] key function.
S
ET
M
ODE
I
TEM
02 [AF DUAL]
03 [ANTENNA AM]
05 [ANTENNA FM]
48 [SPEAKER OUT]
53 [STEREO]
S
ET
M
ODE
I
TEM
06 [APO]
16 [BUSY LED]
42 [RX SAVE]
61 [WAKEUP]
S
ET
M
ODE
I
TEM
10 [BEEP EDGE]
11 [BEEP LEVEL]
12 [BEEP MELODY]
13 [BEEP SELECT]
14 [BELL RINGER]
15 [BELL SELECT]
S
ET
M
ODE
I
TEM
19 [CW LEARNING]
20 [CW PITCH]
21 [CW TRAINING]
S
ET
M
ODE
I
TEM
23 [DCS CODE]
24 [DCS INVERSION]
39 [PR FREQUENCY]
49 [SQL LEVEL]
50 [SQL S-METER]
51 [SQL TYPE]
55 [TONE FREQUENCY]
56 [TONE-SCH MUTE]
57 [TONE-SCH SPEED]
S
ET
M
ODE
I
TEM
26 [F KEY HLD TIME]
60 [VOLUME MODE]
A
VAILABLE
V
ALUES
(
D
EFAULT
:
B
OLD
I
TARIC
)
OFF
/ 1 sec - 10 sec (1 sec/step)
BAR ANTENNA /
BAR+EXT ANT
EXT ANTENNA
/ EARPHONE ANT
AUTO
/ SPEAKER
MONO /
STEREO
A
VAILABLE
V
ALUES
(
D
EFAULT
:
B
OLD
I
TARIC
)
OFF
/ 0.5 hour - 12.0 hour (0.5 hour/steps)
OFF /
ON
200ms
- 900ms (100 ms/step),
1.0sec - 10.0sec (0.5 sec/step), or OFF
OFF
/ 5 sec - 60 sec (5 sec/step)
A
VAILABLE
V
ALUES
(
D
EFAULT
:
B
OLD
I
TARIC
)
OFF
/ ON
LEVEL 1 - LEVEL 9 (
LEVEL 5
)
---
OFF /
KEY+SCAN
/ KEY
1 time
- 20 times / CONTINUOUS
OFF
/ BELL / USER BEEP1 / USER BEEP2 /
USER BEEP3
A
VAILABLE
V
ALUES
(
D
EFAULT
:
B
OLD
I
TARIC
)
---
400 - 1000 Hz (50 Hz/step) (
700 Hz
)
---
A
VAILABLE
V
ALUES
(
D
EFAULT
:
B
OLD
I
TARIC
)
104 standard DCS codes
NORMAL
/ REVERSE / BOTH
300Hz - 3000Hz (1000 Hz/step)
(
1600 Hz
)
LEVEL 0 - LEVEL 15 (AM and Narrow FM),
(
LEVEL 1
)
LEVEL 0 - LEVEL 8 (Wide FM and AM Broadcast)
(
LEVEL 2
)
OFF
/ LEVEL 1 - LEVEL 8
OFF
/ TSQL / DCS / RVTN / PR FRQ
50 standard CTCSS tones (
100.0Hz
)
OFF /
ON
FAST
(2.5 tone/sec) / SLOW (1.25 tone/sec)
A
VAILABLE
V
ALUES
(
D
EFAULT
:
B
OLD
I
TARIC
)
FW 0.3 sec /
FW 0.5 sec
/
FW 0.7 sec / FW 1.0 sec/FW 1.5 sec
NORMAL
/ AUTOBACK
Summary of Contents for VR-160
Page 57: ...VR 160 OPERATING MANUAL 55 NOTE...
Page 97: ...VR 160 OPERATING MANUAL 95 NOTE...