Yaesu VR-160, Operating Manual, Page: 47 / 100

VR-160 O
PERATING
M
ANUAL
45
S
CANNING
To set the Scan-Restart Delay Time:
1.
Press and hold in the [ BANK
] key for one second to enter the Set mode.
2. Rotate the DIAL knob to select Set Mode Item 44: SCAN RE-
START
.
Note : Do not forget to pull the
DIAL
knob to rotate the
DIAL
knob.
3. Press the [ BANK
] key momentarily to enable adjustment of this
Set Mode Item.
4. Rotate the DIAL knob to select the desired Scan-Restart Delay
Time. Available selections are
100ms
-
900ms
(100 ms/step)
and 1.0sec - 10.0sec (0.5 sec/step).
5. When you have made your selection, press and hold in the [ BANK
] key for one sec-
ond to save the new setting and exit to normal operation.
The default condition for this Set Mode Item is “2.0sec”.