Yaesu VR-160, Operating Manual, Page: 81 / 100

VR-160 O
PERATING
M
ANUAL
79
Set Mode Item 23
[
DCS CODE
]
Function
: Setting of the DCS code.
Available Values : 104 standard DCS codes
Default
: DCS.023
Note : This Set Mode Item can select and set the function to each memory channel indi-
vidually.
Set Mode Item 24
[
DCS INVERSION
]
Function : Enables/Disables the “Inverted” DCS Tone.
Available Values
: NORMAL/REVERSE/BOTH
Default : NORMAL
NORMAL: Receive the Normal DCS Tone.
REVERSE: Receive the Inverted DCS Tone.
BOTH:
Receive both Normal and Inverted DCS Tones.
Note : This Set Mode Item can select and set the function to each memory channel indi-
vidually.
Set Mode Item 25
[
EXTENDED MENU
]
Function : Enables/Disables the extended Set Mode Menu.
Available Values
: OFF/ON
Default : OFF
Set Mode Item 26
[
F KEY HLD TIME
]
Function
: Set the duration that a secondary function of the [ F/W
] key (press and holding
the [
F/W
] key) is held determines the function they activate.
Available Values
: FW 0.3 sec/FW 0.5 sec/FW 0.7 sec/ FW 1.0 sec/FW 1.5 sec
Default : FW 0.5 sec
Set Mode Item 27
[
LAMP
]
Function
: Selects the LCD/Keypad Lamp mode.
Available Values : KEY 2 sec - KEY 10 sec/CONTINUOUS/OFF
Default
: KEY 5 sec (5 seconds)
KEY 2 sec - KEY 10 sec: Illuminates the LCD/Keypad for the selected time, when any
key is pressed.
CONTINUOUS: Illuminates the LCD/Keypad continuously.
OFF: Disables the LCD/Keypad illumination.
S
ET
(
M
ENU
)
M
ODE