Yaesu VR-160, Operating Manual, Page: 71 / 100

VR-160 O
PERATING
M
ANUAL
69
M
ISCELLANEOUS
S
ETTING
C
HANGING THE
S
TATUS OF THE
[
VOL
]
K
EY
By factory default, the [
VOL
] key keeps the status while pressing and holding the [
VOL
]
key down. You may change the status of the [ VOL
] key to keep the status for approxi-
mately three seconds after pressing the [
VOL
] key, after which time it reverts back to its
previous status.
1. Press and hold in the [ BANK
] key for one second to enter the Set mode.
2. Rotate the
DIAL
knob to select the Set Mode Item 60: VOLUME
MODE .
Note : Do not forget to pull the
DIAL
knob to rotate the
DIAL
knob.
3. Press the [
BANK
] key briefly to enable adjustment of this Set
Mode Item.
4. Rotate the
DIAL
knob to select the desired mode.
NORMAL : The [ VOL
] key keeps the status while pressing
and holding the [
VOL
] key down.
AUTOBACK
: The [ VOL
] key keeps its status for approximately three seconds after
pressing the [
VOL
] key.
5. When you have made your selection, press and hold in the [ BANK
] key for one sec-
ond to save the new setting and exit to normal operation.
S-
METER
S
YMBOLS
The VR-160 has three types of S-meter symbol formats available. You may change the
default setting to any of the available symbols.
1. Press and hold in the [
BANK
] key for one second to enter the Set mode.
2. Rotate the DIAL knob to select the Set Mode Item 47:
S-METER
SYMBOL .
Note : Do not forget to pull the DIAL knob to rotate the DIAL
knob.
3. Press the [ BANK
] key briefly to enable adjustment of this Set
Mode Item.
4. Rotate the DIAL knob to select the desired S-meter symbol type.
, , or
5. When you have made your selection, press and hold in the [ BANK
] key for one sec-
ond to save the new setting and exit to normal operation.