Yaesu VR-160, Operating Manual, Page: 74 / 100

VR-160 O
PERATING
M
ANUAL
72
S
ET
(
M
ENU
)
M
ODE
F
UNCTION
Select the Configuration of the ACC Jack.
Enables/Disables the AF DUAL function and sets
the time before Broadcast audio is resumed after
the desired frequency signal drops.
Select the antenna to be used while listening in
the AM Broadcast band.
Enables/Disables the receiver Front-end Attenu-
ator.
Select the antenna to be used while listening in
the FM Broadcast band.
Setting of the Automatic Power-Off feature.
Selects the Band Scope sweep mode.
Enables/Disables the Memory Bank Link Scan.
Stores Alpha-Numeric “Tags” for the Memory
Banks.
Enables/Disables the Band-edge beeper while se-
lecting the frequency using the DIAL knob.
Adjust the Beep volume level.
Create the beep melody for Bell ringer function.
Enables/Disables the Keypad beeper.
Selects the number of Bell ringer repetitions.
Enables/Disables the Bell ringer function and its
sound selection.
Enables/Disables the
BUSY LED while the
Squelch is open.
Selects the Channel Counter Search Width.
Shifting of the CPU clock frequency.
Enables/Disables the CW Learning feature.
Selects the CW tone pitch for the CW Learning
and CW Training features.
Enables/Disables the CW Training feature.
Indicates the DC Supply Voltage.
Setting of the DCS code.
Enables/Disables the “Inverted” DCS Tone.
Enables/Disables the extended Set Mode Menu.
Set the duration that a secondary function of the
[
F/W
] key (press and holding the [
F/W
] key) is held
determines the function they activate.
Selects the LCD/Keypad Lamp mode.
Setting of the Display contrast level.
Illuminates the
BUSY indicator.
Toggles the display indication between “frequency”
and “Alpha/Numeric” channel tags.
Selects the channel step for the fast channel se-
lection mode while in the Memory Recall mode.
Stores “Alpha-Numeric” tags for the Memory chan-
nels.
Enables/Disables the Memory Write Protector.
Selects the Memory Scan channel-selection
mode.
Determines the method of selecting channels for
Memory Storage.
Set the On Timer Time.
Selects the Opening Message that appears when
the radio is powered on.
Programs and activates the Password feature.
Program the CTCSS Tone frequency for the User
programmed Reverse CTCSS Decoder.
Selects the time between the Priority (Dual Watch)
channel checks, when the feature is active.
S
ET
M
ODE
I
TEM
1 [ACC SELECT]
2 [AF DUAL]
3 [ANTENNA AM]
4 [ANTENNA ATT]
5 [ANTENNA FM]
6 [APO]
7 [BAND SCOPE]
8 [BANK LINK]
9 [BANK NAME]
10 [BEEP EDGE]
11 [BEEP LEVEL]
12 [BEEP MELODY]
13 [BEEP SELECT]
14 [BELL RINGER]
15 [BELL SELECT]
16 [BUSY LED]
17 [CH COUNTER]
18 [CLOCK SHIFT]
19 [CW LEARNING]
20 [CW PITCH]
21 [CW TRAINING]
22 [DC VOLTAGE]
23 [DCS CODE]
24 [DCS INVERSION]
25 [EXTENDED MENU]
26 [F KEY HOLD TIME]
27 [LAMP]
28 [LCD CONTRAST]
29 [LED LIGHT]
30 [MR DISPLAY]
31 [MR FAST STEP]
32 [MRNAME]
33 [MR PROTECT]
34 [MR SKIP]
35 [MR WRITE MODE]
36 [ON TIMER]
37 [OPEN MESSAGE]
38 [PASSWORD]
39 [PR FREQUENCY]
40 [PRI TIMER]
A
VAILABLE
V
ALUES
(
D
EFAULT
: B
OLD
I
TARIC
)
OFF / AM ANTENNA / LINE IN /
PC PROGRAM / S-METER
OFF / 1 sec - 10 sec (1 sec/step)
BAR ANTENNA / BAR+EXT ANT
OFF / ON
EXT ANTENNA / EARPHONE ANT
OFF / 0.5 hour - 12.0 hour (0.5 hour/steps)
1time / CONTINUOUS
---
---
OFF / ON
LEVEL 1 - LEVEL 9 ( LEVEL 5
)
---
OFF / KEY+SCAN / KEY
1 time - 20 times / CONTINUOUS
OFF / BELL / USER BEEP1 /
USER BEEP2 / USER BEEP3
OFF / ON
±5 MHz / ±10 MHz / ±50 MHz / ±100 MHz
OFF / ON
---
400 - 1000 Hz (50 Hz/step)
(
700 Hz
)
---
---
104 standard DCS codes
NORMAL / REVERSE / BOTH
OFF / ON
FW 0.3 sec / FW 0.5 sec / FW 0.7 sec /
FW 1.0 sec / FW 1.5 sec
KEY 2 sec - KEY 10 sec /
CONTINUOUS / OFF ( KEY 5 sec
)
LEVEL 1 - LEVEL 9 ( LEVEL 5
)
---
MAIN:FREQ / MAIN:ALPHA
10 CH / 20 CH / 50 CH / 100 CH
---
OFF / ON
OFF / SKIP / ONLY
LOWER / NEXT
OFF / 00H.10M (00:10) - 24H.00M (24:00)
(10 minutes/step)
OFF / DC / MESSAGE
---
300Hz - 3000Hz (100 Hz/step)
( 1600Hz
)
100ms - 0.9ms (100 ms/step) or
1.0sec - 10.0sec (0.5 sec/step) ( 5.0sec
)