Yaesu VR-160, Operating Manual, Page: 37 / 100

VR-160 O
PERATING
M
ANUAL
35
Press and hold in the MONI switch to reverse the charac-
ter size between “Alpha-numeric Tag” and “frequency”
to check the frequency of the “Tagged” memory channel
more easily. Release the MONI switch to return to the normal display.
To disable the alpha-numeric Tag and enable the large frequency display:
1.
Set the
VR-160
to the “MR” (Memory Recall) mode, and recall the memory channel
on which you wish to disable the alpha-numeric Tag.
2. Press and hold in the [
BANK ] key for one second to enter the Set mode.
3. Rotate the DIAL knob to select the Set Mode Item 30:
MR DIS-
PLAY .
Note
: Do not forget to pull the DIAL knob to rotate the DIAL
knob.
4. Press the [ BANK
] key briefly to enable adjustment of this Item’s
setting.
5. Rotate the DIAL knob to set this Set Mode Item to “
MAIN:FREQ
”
(thus disabling the alpha-numeric display).
6. Press and hold in the [ BANK
] key for one second to save the
new setting and return to memory mode with frequency display.
To enable the alpha-numeric Tag (label) display again, just repeat
the above procedure, rotating the
DIAL knob to select “
MAIN:ALPHA
” in step 5 above.
You may set up some memory channels to have their frequencies displayed,
while others may be set to have their Name Tag displayed. The selection within
Set Mode Item 49: MR DSP is not applied to
all memory channels at once.
M
EMORY
M
ODE
(
R
EGULAR
M
EMORY
C
HANNEL
O
PERATION
)
L
ABELING
M
EMORIES