Yaesu VR-160, Operating Manual, Page: 24 / 100

VR-160 O
PERATING
M
ANUAL
22
C
HECKING THE
B
ATTERY
V
OLTAGE
The
VR-160
’s microprocessor includes programming which will detect the battery type
and measure the current battery voltage.
1. Press and hold in the [ BANK
] key for one second to enter the Set mode.
2. Rotate the
DIAL
knob to select Set Mode Item 22: DC VOLT-
AGE
.
Note : Do not forget to pull the
DIAL
knob to rotate the
DIAL
knob.
3. Press the [
BANK
] key briefly to display the battery type and the
current DC voltage being supplied.
Lit :
FNB-82LI
is in use.
Edc
: An external DC source is in use.
4. Press and hold in the [
BANK
] key for one second to return to normal operation.
C
HECKING THE
T
EMPERATURE
The VR-160 can display the radio’s inside case temperature, measured by an internal sensor.
1. Press and hold in the [ BANK
] key for one second to enter the Set mode.
2. Rotate the
DIAL
knob to select Set Mode Item 54: TEMPERA-
TURE
.
Note : Do not forget to pull the
DIAL
knob to rotate the
DIAL
knob.
3. Press the [
BANK
] key briefly to indicate the current tempera-
ture inside the transceiver’s case.
4. Press the [
MODE
] key to select the preferred unit (
F (°F) or C
(°C)).
5. Press and hold in the [
BANK
] key for one second to save the new setting and exit to
normal operation.
A
DVANCED
O
PERATION