P 5
V.1.1
da Vinci 1.0 Pro 3in1
Maintenance and Service
Keep original packaging material in the event of sending your unit back for repair during
the warranty period. If other packing materials are used instead, the print-er may be
damaged during the transportation process. In such situation, the XYZprinting the right
to charge repair fee.
Notes and Description for Use of Maintenance Tools
• The following tools can be used only in an environment with guidance or monitoring by adult. Do
not allow children to obtain maintenance tools in unfamiliar situations in order to avoid danger.
• Please make sure to maintain the printer as the bed is cooled.
• After print is finished and the print bed is cooled to room temperature, the printing object may be
taken off with Scraper.
• In order to prevent print quality from impact due to residual and accumulated filament, which
results in poor discharge, after long-term use of print nozzle, it is recommended to enable the
"CLEAN NOZZLE" (nozzle cleaning) function of the printer every 25 hours of print to clear
residuals with nozzle cleaning wire or feeding path cleaning wire. (Filament should be unloaded
from the extruder before cleaning the feeding path.).
• Filament residuals produced during print may also attach onto nozzle and gear of print module to
influence print quality, printer operation, as well as measurement result of bed. For such situation,
please use cooper brush to clean the print module.
●
Display and Control Panel
Direction Up / Increase the value
Back to pervious menu /
Adjust the value /Move
to the preview item
Go to the next menu /
Adjust the value /Move
to the next item
Select / Confirm setting /
Confirm and exit
Direction Down / Decrease the value
Home menu
OK
Pro. 3in1
UTILITIES
SETTINGS
INFO
