P 24
V.1.1
da Vinci 1.0 Pro 3in1
When you find inaccurate scan results, please follow the steps for scanning devices calibration.
Wait until XYZscan and the printer finish
calibration (for approx. 7 minutes)
When XYZscan prompts of calibration
completed, remove the calibrating plate, and
click “OK” to fi nish. You may begin to scan.
Remove the object from the tumtable
In XYZscan, select "Setting" > "Calibrate Now"
Wait until XYZscan shows the instructions of calibrating plate placement, place the plate at the center
of the turntable (with chessboard pattern facing the left scanner and insert the tab at the bottom of the
calibrating plate into the hole at the center of the turntable), then click “Calibrate now” button.
4
1
2
5
3
Original model
Scanning result
before calibration
Scanning result
after calibration
Scanning Devices Calibration
●
