P 4
V.1.1
da Vinci 1.0 Pro 3in1
8
Open the box and
remove the accessories
and the cushion
Use the grip to take
off the machine
Remove 2 foams at the front of the cardboard
Open the upper cover and remove
fixities listed above
Remove fixing
paperboard
Pay attention particularly to actual
paperboard removal of the fixities listed
above except step 11.
Be sure to remove the fixing foam from
the axis
Be sure to remove the
cable tie as illustrated
above
Do not cut this
white cable tie.
Remove the fixing
styrofoam beside the bed
Remove bottom screw and the
fixing screw on the bottom of
the bed
Insert the bundled
software CD into the
computer and install the
software according to
instruction
Use the USB cable to
connect the printer to PC.
Connect the power cord
to the printer then turn on
the power switch
Packing support x2
Cable tie x1
Cable tie x1
Tape x2
Packing support x2
9
5
11
12
6
7
2
4
Important Safety Notes
•
Do not use the printer in dust rich, highly humid or outdoor environments.
•
Do not use the printer on a soft or tilt table to prevent the machine from falling, which may result in damage or personal injury.
•
Do not put your hand into the machine during operation to avoid collision risk due to movement of the machine or to avoid burn
due to high temperature.
Note: Please removal all fixed materials before turning on the printer to prevent the
machine from damage
Open the box
1
Product Description
Remove all fixing tapes and
the packing bag
3
Tape x2
