Installation and Setup
WebRelay-10 Users Manual
2.4.9 Sensor Tab (WebRelay-10 Plus™ only)
This tab is used to configure temperature/humidity sensors and associated alarms. WebRelay-10 Plus™
will automatically detect whether a temperature or humidity sensor is connected.
Sensor
Up to eight sensors can be connected to WebRelay-10 Plus™. This drop-down list selects the
sensor to be configured. The fields below are the same for each sensor.
Sensor Description
The text in this field appears to the left of the corresponding temperature/humidity reading on the
Control Page. This text also appears in the email status message when email is enabled. This field
can be up to 24 characters in length. The default text in this field is Sensor #.
Sensor Address
Each sensor connected to WebRelay-10 Plus™ should be associated (or assigned) to a sensor
number. This identifies the name, location, and function of the sensor. Every temperature/humidity
sensor comes from the factory with a unique, non-changeable address. When the sensors tab is
selected (or the Refresh List button is pressed), WebRelay-10 Plus™ scans the bus for sensors.
page 42
Xytronix Research & Design, Inc.
Figure 2.4j - Sensors Tab
