Installation and Setup
WebRelay-10 Users Manual
2.4.12 Control Page Setup Tab
The
Control Page Setup
page is used mainly to set parameters that affect the view of the
Control
Pag
e, how often it will refresh, etc.
Main Header Text
The text entered here appears at the top of the
Control Page
. It also appears in the header of the
email text when the email notification is used. This field can be up to 40 characters in length. The
default text is
WebRelay-10
.
Auto Refresh
The Auto Refresh Page option will cause the
Control Page
to continually update its contents by
setting a timer in the web page that causes it to be reloaded at a specified time interval. When set to
Yes
, the web page will be refreshed at the time interval specified in the Refresh Rate setting. When
set to
NO
, the web page will need to be manually refreshed to show the current status of the unit in
the control page.
Refresh Rate
When the Auto Refresh Page option is set to
Yes
, this field specifies the time interval in seconds
that the page will be refreshed. It can be set from 1 to 32 seconds.
Display Configuration
This field sets the options that are displayed on the
Control Page
.
-
Display State
: For Inputs 1 and 2, Relays 1-10, and Sensors 1-3, this controls whether the
current states of the Relay, Input, and Sensor are displayed.
-
Display Counter
: When checked, the counter is displayed for the selected input.
-
Display Counter Reset Button
: When checked, a Reset button is displayed to reset the
counter on the selected input.
page 52
Xytronix Research & Design, Inc.
Figure 2.4p - Control Page Setup Tab
