WebRelay-10 Users Manual
Operation
Header
Displays the text entered in the Main Header Text field on the
Control Page Setup
tab in the setup
pages.
Input 1 and 2 (WebRelay-10 Plus™ only)
These rows display the current state of the two inputs. These rows can be displayed (as shown) or
not displayed by checking or unchecking the appropriate boxes in the
Control Page Setup
tab in
the setup pages. The text in the left column (by default reads Input 1 and Input 2) is specified in the
Description field in the
Inputs
tab in the setup pages. The state of the input is shown to the right of
the input description text. By default, the status text will read
ON
or
OFF
; however, the status text
can be changed in the
Inputs
tab. To the right of the input status, a button is provided to reset the
counter. The button will be shown when selected on the
Control Page Setup
tab.
Relays 1-10
These rows display the current state of the ten relays and allow the user to change the relay state.
Each of these rows can be displayed (as shown) or not displayed by checking or unchecking the
appropriate boxes on the
Control Page Setup
tab in the setup pages. The text in the left column (by
default reads Relay 1, Relay 2, etc.) is specified in the Description field in the
Relays
tab in the
setup pages. The state of the relay is shown to the right of the relay description text. By default, the
status text will read
ON
or
OFF
; however, the status text can be changed in the
Relays
tab. To the
right of the relay status, buttons are provided to control the relays. The buttons can be removed
when needed (in the
Control Page Setup
tab) and the text within the buttons can be customized (in
the
Relays
tab).
Sensor 1-8 (WebRelay-10 Plus™ only)
These rows display the current temperature or humidity measured by the associated sensors. Each
row can be displayed (as shown) or not displayed by checking or unchecking the appropriate boxes
under the
Control Page Setup
tab in the setup pages. The text in the left column (by default reads
Sensor 1 through Sensor 8), is specified in the Sensor Description field under the Sensors tab in the
setup pages.
External Variables
These rows display the current state of the five external variables. These rows can be displayed (as
shown) or not displayed by checking or unchecking the appropriate boxes in the extvar setup page.
The text in the left column is specified in the Description field on the extvar setup page. The state of
the extvar is shown to the right of the description text. By default the status text will read
ON
or
OFF
.
To the right of the extvar status, buttons and an input box are provided to control the state/value of
the external variable.
Current Time (WebRelay-10 Plus™ only)
Displays the current time that is set using the
Date/Time
tab in the setup pages.
Note: If the sensors are not configured (sensor addresses selected for each sensor) or are
unreadable, the display will read x.x rather than displaying a false numerical value.
Xytronix Research & Design, Inc.
page 55
