Getting Started
2.3.1
Rack Mount Installation (optional)
Rack mount installation is easier when performed by two persons -- one person holding the MAXserver
1600 while another secures the mounting bolts with a Phillips-head screwdriver. (Threaded clips and bolts
are supplied with the unit).
Complete these steps:
1.
Locate a mounting position on the rack that allows at least one inch of space above and below
the MAXserver 1600.
2.
Secure the MAXserver 1600 to the mounting rack using the supplied bolts, as shown in Figure 2-1.
If the rack is not threaded, use the threaded clips supplied with the server.
Rack
Threaded clips -- optional; use
if the rack is not threaded.
Figure 2-1. Mounting MAXserver 1600 in Rack
0590
13
