Getting Started
2.2
Unpack and Inspect the MAXserver 1600
Follow these steps:
1.
Carefully unpack the MAXserver 1600 shipping carton.
2.
Inspect the contents and make sure that you received all parts listed on the shipping order.
3.
Place all packing materials back into the shipping carton and save the carton. (If you need to
return the unit to Xyplex or your distributor, you should return it in the original carton.)
4.
If the MAXserver 1600 has been damaged in shipping or any parts are missing, notify your Xyplex
representative or distributor immediately.
2.3
Place MAXserver 1600 on Flat Surface or Mount on Rack
Select a location for the MAXserver 1600 that meets the following requirements:
Adequate Space -- A standard 19" rack or a 19" x 15" flat, stable surface such as a shelf or desktop
must be available. You can locate the MAXserver 1600 in a variety of environments, including an
office or computer room, provided the environmental requirements are met.
To reduce the possibility of dust entering the MAXserver 1600 and to allow easy inspection of the
unit's front panel lights, make sure that the MAXserver is located at an optimum distance (preferably
not less than 18 inches/45 centimeters) from the floor.
Environment -- Do not choose a location where the unit will be exposed to direct sunlight or
subjected to vibration. Also, the MAXserver 1600 must be installed in an environment with 20% to
80% humidity, noncondensing, 0° - 40° C (32°-113° F).
Place the MAXserver on the flat, stable surface you have chosen for its location or use the instructions in
Section 2.3.1 to mount it in a standard 19" rack.
Do not remove the MAXserver's "feet".
Do not place an object on top of the MAXserver 1600
that might block the air flow through the unit.
☞
12
0590
