Chapter Two - Testing
7
•
Flat-panel display
•
15.0-inch TFT flat panel (3515 and 3515KPM)
•
12.1-inch TFT flat panel (3512KPM)
•
CD-ROM (internal)
•
Pre-installed PCI 10/100 Base-T Ethernet card
•
External floppy drive 9000-EXF
•
Front mount floppy kit 9000-FFK
•
Front access panel for floppy port and keyboard port 9000-FKA
•
Preloaded Microsoft
Windows 95 or Windows NT® operating system
Unpacking the System
When you remove the system from its box, verify that you have the parts listed below.
Save the box and inner wrapping in the event you need to reship the unit.
•
3515, 3515KPM, or 3512KPM unit
•
AC power connector
•
Power connector retainer bracket with AC power supply
•
Sixteen 10-32 hex nuts (2 spares)
•
Clip-on Ferrite for AUX cables
•
Documentation kit, which includes:
•
Diagnostic software disk (only on units shipped with DOS)
•
VGA utility disk
•
3515/3512KPM manual
•
CPU manual
•
Business reply card
If you ordered the system with a touchscreen installed, you will also receive a touch-
screen driver disk and manual. If you ordered a CD-ROM installed, you will receive the
driver disk. If you ordered a 3512KPM or 3515KPM, you will receive a mouse disk and
manual. If you ordered the system with an Ethernet card you will receive a driver disk.
Quick Start-up
This section provides the steps to get your unit up and running without explaining the
capabilities and options of the system.
Warning
Turn off power to the unit and disconnect the power cord before making
any adjustments to the inside or the outside of the computer.
Perform the following steps to prepare the system for use.