Chapter Three - Installation
29
Installing Drivers
This section describes how to install the drivers associated with the 3500 series.
Ethernet Drivers
If Windows 95 or Windows NT 4.0 is pre-installed on your system and you ordered the
Ethernet card option, Ethernet drivers are installed on your hard drive in the C:\netdrv di-
rectory.
Note
If you want to use Ethernet capabilities with Windows 95, your system
must have BIOS revision level 1.1 or higher.
If MS-DOS is installed on your system, the Ethernet drivers are supplied on your hard
drive in the C:\netdrv directory, but they are not installed.
To install the MS-DOS Ethernet drivers,
1.
At the C: prompt, type “cd netdrv”.
2.
Once the C:\netdrv path is specified, type “install”.
3.
Follow the on-screen instructions to complete installation.
If you install Windows 3.1 on your system, Xycom Automation provides the Ethernet
drivers. They can be found on the Ethernet Drivers disk that ships with your system.
Note
If you install Windows NT 4.0 or Windows 95 on your system, the
Ethernet drivers that are provided do not work with the Ethernet controller
installed. You must use the drivers provided by Xycom Automation. These
drivers can be found on the Ethernet Drivers disk that ships with your
system.
Consult the Info directory on the drivers disk for additional installation information.
Video Drivers
Video drivers for each operating system are on the diskettes included with the documen-
tation kit. To install a video driver, refer to the INSTALL.TXT file on the diskette for
your operating system.