Xtreme Manufacturing XR619 Operation And Safety Manual Download Page 30

Page: 30 / 74

Operation Manual

www.xmfg.com

Operator Cab

Warning

A brief description of controls, indicators, and

instruments is provided as a convenience for

the operator. These descriptions DO NOT pro-

vide complete operation instructions. Read

and understand the entire manual to prevent

death, serious injury, or equipment damage.

Ignition Switch

A key is required to operate the ignition switch.

The ignition switch has three (3) positions: OFF, RUN, and

START.

Ignition Switch

Position

Purpose

OFF

Shuts down entire electrical system, except

the horn and accessory outlet.

RUN

All controls and indicators are operable.

START

Engages starter motor to crank engine.

NOTE: The START position is spring-loaded. When the key is

released, the Ignition switch will automatically return to the

RUN position.

Accessory Outlet

Accelerator Pedal

Press the accelerator pedal to increase engine speed. The

accelerator pedal is spring-loaded to return to idle speed.

Fig 12. Accelerator Pedal

Service Brake Pedal

Press the service brake pedal to slow or stop the forklift. The

service brake pedal activates the service brakes on the front

(2) wheels.

Fig 10. Ignition Key Switch

Fig 11. Accessory Outlet

A 12 Volt accessory outlet is provided as a power source for

personal items, such as a radio or cell phone (10 amps max).

Summary of Contents for XR619











































































Search results

Summary of Contents for XR619

Reviews:

Related manuals for XR619

Brands by name

Popular brands

Xtreme Manufacturing XR619, Operation And Safety Manual

Search results

Summary of Contents for XR619

Reviews:

Related manuals for XR619

Brands by name

Popular brands